Cop y – Canon IXUS 230 HS User Manual
Page 176
Using an Eye-Fi Card
176
You can check the Eye-Fi card’s access point SSID, or connection status.
Choose [Connection info].
z
Press the
n button to choose [Eye-Fi
Settings] in the
3 tab, then press the m
button.
z
Press the
op buttons to choose
[Connection info], then press the
m
button.
X
The connection info screen will appear.
You can set the card to disable Eye-Fi transfer.
Choose [Disable] in [Eye-Fi trans.].
z
Press the
n button to choose [Eye-Fi
Settings] in the
3 tab, then press the m
button.
z
Press the
op buttons to choose [Eye-Fi
trans.], then press the
qr buttons to
choose [Disable].
Checking Connection Information
Disabling Eye-Fi Transfer
What if [Eye-Fi Settings] does not appear?
[Eye-Fi Settings] will not appear when an Eye-Fi card is not inserted in the
camera, and when an Eye-Fi card’s write-protect tab is in the locked position. For
this reason, settings cannot be changed for Eye-Fi cards equipped with a write-
protect tab when the tab is in the locked position.
COP
Y