Canon IXUS 230 HS - Manual (Page 180)

List of Messages That Appear on the Screen
180
Computer
Cannot transfer images to a computer.
It may be possible to solve the problem when the camera is connected to a computer via
cable by reducing the transfer speed.
• After pressing the 1 button to enter Playback mode, press and hold the n button
and the o and m buttons together. In the screen that appears, press the qr buttons
to choose [B], then press the m button.
Eye-Fi Card
Cannot transfer images (p. 175).
If error messages appear on the screen, try one of the following solutions.
No memory card
• The memory card is not installed in the correct direction. Install the memory card in the
correct direction (p. 17).
Memory card locked
• The SD memory card, SDHC memory card, SDXC memory card or Eye-Fi card’s write
protect tab is set to “LOCK”. Unlock the write protect tab (p. 17).
Cannot record!
• You attempted to shoot an image without a memory card. Insert the memory card in the
correct direction to shoot (p. 17).
Memory card error (p. 159)
• If the same message appears even when a formatted memory card is inserted in the
correct direction, contact a Canon Customer Support Help Desk (p. 17).
Insufficient space on card
• There is not enough free space on the memory card to shoot (pp. 26, 31, 51, 61, 81,
103) or edit images (pp. 136 – 140). Erase the images (pp. 30, 128) to open space for
new images, or insert an empty memory card (p. 17).
Change the battery pack. (p. 17)
No Image.
• There are no images recorded on the memory card that can be displayed.
List of Messages That Appear on the
Screen
COP
Y