Kenwood KR-897 - Manual (Page 2)

■
AmSmSm
Units are designed for operation as foHows.
U.S:A. and Canada............................................................AC120 V only
Australia.............................................................................AC 240 V only
КЯВ97/КЯ797 [EnJ
Europe and U.K................................................................ AC 230 V only
China and Russia.................................... ;....................... AC 220 V only
*Other eottotries............................AC 110-120/220-240 Vswitehable
*AC voltage selection AC voltage selector switch
The AC voltage selector switch oo the rear pane! is set to the voltage
that prevails In the area to which the unit is shipped. Before connectirtg
the power cord to your AC outlet, make sure that the setting position
of this switch matches your line voltage. If not. it must be set to your
voltage in accordance with the following direction.
Note:
■Our warranty does not cover damage caused by excessive line voltage
due to improper setting of the AC voltage selector switch.
Move switch lever to match your line voltage
with a small screwdriver or other pointed tool.
Safety precautions
Caution: Read this section carefuliy to ensure safe operation.
WARNING ; TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. .
CAUTION; TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALI­
FIED SERVICE PERSONNEL.
A
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS IN­
TENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN
THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF
ELECTRIC SHOCK TO PERSONS.
A
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO
THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE APPLIANCE.
Unpackim
Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage.
If your unit is damaged or fails to operate, notify your dealer immediately. II your unit was shipped to you directly, notify the shipping company without delay.
Only the consignee (the person or company receiving the unit) can file a claim against the carrier for shipping damage. We recommend that you retain the
original carton and packing materials for use should you transport or ship the unit in the future.
Accessories