Audio.s&f^qll – Kenwood KR-897 User Manual

Page 30

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

^Caution :Read this page carefully to ensure safe operation-

KR€97/KR.797 (En|

AudiO.S&f^QlL.

Rated power output at the STEREO operation

110 watts per channel minimum RMS, both channels

driven at 8 £2, from 40 Hz to 20,000 Hz with no more than

0.8 % total hannonic distortion. (FTC)

Power output at the SURROUND operation

Front

___________

110 watts per channel minimum RMS, both channels

driven, at 8 £2, 1 kHz with no more than 0.8

%

total

harmonic distortion.

Center

110 watts minimum RMS at 8 £2,1 kHz with no more than

0.8

%

total harmonic distortion.

Tuning frequency range.................... 87.5 MHz - 108 MHz

Usable sensitivity

MONO.................................... 1.3 pV (at 75

£2)

/ 13.2 dBf

(75 kHz dev., SINAD 30 dB|

50 dB quieting sensitivity

STEREO.................................31.6 pV (at

75 £2)

/ 41.2dBf

Total harmonic distortion (1 kHz)

MONO........................ ;.................... 0.5 % (65 dBf input)
STEREO...........................................0.6 % (65 dBf input)

Signal to noise ratio (1 kHz 75 kHz dev.)

MONO............................................. 75 dB (tó dBf input)
STEREO....................................... 68 dB (65 dBf input)

Stereo separation (1 kHz)..........................................40 dB
Selectivity (IHF *400 kHz).......................................... 66 dB

Frequency response.......30 Hz ~15 kHz, + 0.5 dB, — 3.0

dB

Surround

110 watts per channel minimum RMS, at 8 £2,1 kHz with
no more than 0.8 % total harmonic distortion. _____________

Total harmonic distortion.....................0.3

% (1 kHz, 55 W, 8 £2)

Signal to noise ratio (IHF'66)

PHONO (MM)........................................................................... 75 dB

LINE (CD)..................................................................................93 dB

Input sensitivity / impedance

PHONO (MM)......................................................... 3.0 mV / 47 k£2

CD........................................................................... 220 mV / 47 k£2

Tone controls

BASS.................................................................. i 8 dB (at 100 Hz)
MIDDLE............................................................ s 8 dB (at 900 Hz)

TREBLE.............................................................. s 8 dB (at 10 kHz)

N.B. circuit........................

.1...

................................. + 5 dB (80 Hz)

Output level / impedance

Sub woofer preout....................................................2.0 V / 600 £2

Tuning frequency range.............................. 530 kHz * 1,700 kHz

Usable sensitivity (30 % mod., S/N 20 dB)

..................................................................... 15 pV / (500 pV / m)

Signal to noise ratio (30 % mod., 1 mV input).................... 48 dB

Power consumption.................. ................................................2.8 A

A AC outiet

SWITCHED ............................................. 1: (300 W, 2.5 A max.)

Dimensions............................... ..................W:440 mm (17-5/16")

H:127 mm (5")
D:389mm (15-5/16")

Weight (net).............................................................. 9.0 kg (19.9 lb)

1.

KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.

..

t

.JTZI 2. Full performance may not be exhibited in extremely cold locations (below 0 deg.C),

WSIotea

Advertising