Technical data dimensions, Manual change summary – Graco HIGH EFFICIENCY LOW PRESSURE AA2000 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Technical Data
Dimensions
Maximum Working Fluid Pressure ... 950 psi (66 bar)
*Maximum Working Air Pressure................. 100 psi (7 bar)
**Maximum Operating Air Pressure............. 10 psi (0.7 bar)
Weight (less filter) .....................................1.2 lb (0.55 Kg)
Wetted Parts.............. Stainless Steel, Carbide, Ultra
High Molecular Weight
Polyethylene, PTFE Delrin®
PTFE
and Delrin® are registered trademarks of the
DuPont Co.
*The
MAXIMUM WORKING AIR PRESSURE
Indicates the
maximum air pressure the gun was designed to operate
safely under.
**The
MAXIMUM
OPERATING
AIR
PRESSURE
Indicates
the maximum air pressure the air cap supplied with this
gun was designed to operate at or below to comply with
California Wood Rule 1136.
To guarantee compliance to
rule 1136, the gun must be used with Air Regulator Part
No. 110-776. This regulator limits the operating pres
sure to 10 psi (0.7 bar), using an air supply pressure of
100 psi (7 bar).
Manual
Change Summary
This manual was revised to change the gun series
letter to C and to change air regulator 185-349 to
part no. 110-776.
307-947
19