Charging the battery pack – Uniden DS70 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A
Use only Uniden Battery
supplied with your phone.
INSTALLING THE HANDSET BATTERY PACK
1. Press and slide the battery cover off,
2. Align the plastic connector of the
Nickel Metal Hydnde battery with its socket
and plug it in.
3. Place the battery pack inside.
4. Slide the battery cover back
until it snaps into place.
CHARGING THE BATTERY PACK
T
Initial battery charging
Before connecting your phone for the first time, fully
charge the rechargeable battery pack for 15-20 hours
without interruption.
I. Place the handset on the base
2, Make sure that the
Charging
LED lights. If the LED doesn’t
light, check the AC adaptor is
plugged m and and switched
ON. Also check the handset has
good contact with the base
charging contacts.