Headset installation, Automatic digital code security – Uniden DS70 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A
Use only the Uniden
HS910/
h
S90() headset
A
Keep the headset wire away
from handset and
base antennas.
HEADSET INSTALLATION
Your phone may be used with an optional
headset, the Uniden HS910/HS900.
To use this feature, simply plug the headset
into the headset jack. Your phone is
ready for hands-free conversations.
headset
Jack
A
If you are using an optional headset, you must still use the
handset keypad for phone operations.
When using a headset on DS70, an АСА approved headset
is required.
AUTOMATIC DIGITAL CODE SECURITY
To prevent other panics ftom making unauthorised calls on your phone line, a
digital code was added to the DS70. Your phone’s handset and base share this
code. This code is randomly set each time you place the handset in the base. If
the phone experiences a power failure, you must reset the digital security' code by
placing the handset on the base.
T
To reset the digital security code
1. Restore power to the base.
2. Place the handset on the base.
Talk/End
(on the handset) and
In use
{on the base) LEDs momentarily blink.
The digital security code is reset.
12