Uniden DS70 - Manual (Page 16)

The pause button counts as
one digit. Pressing
Rediat/Pause
more
than once increases the
length of pause between
numbers.
STORING A PHONE NUMBER IN MEMORY
1. Make sure the handset is in standby mode (In Use light is OFF).
2. Press the Memory button on the handset.(the In Uselightwill
begin flashing
3. Enter the phone number, up to 16 digits
4. Press Memory again
5. Enter the two digit memory location nmber (01­
20) on the keypad {the
In Use light will stop flashing
and you will hear two confirmation beeps.
6. Repeat these steps to store additional phone numbers.
PAUSE FUNCTION
In some cases, such as PABX or long distance service, a pause may be needed in the
diahing sequence. Pressing the
Redial/Pause button on the handset inserts a
2 second delay between dialled numbers. Pause(s) can be inserted into the programmed
dialling sequence in memory locations.
DIALLING A NUMBER IN MEMORY
1. Press Taik/End
2. Press Memory
3. Enter the two digit memory location number (01-20). The number
automatically dials. .
CHANGING A STORED NUMBER FROM MEMORY
Follow the steps in the section Storing a Phone Number in Memory. The new
phone number will automatically replace the previous one.
15