Uniden DS70 - Manual (Page 8)

Before connecting your
phone Ime, fully charge the
Nickel- Metal Hydride battery
pack for IÖ-20 hours.
A
Place the power cord so
that it does not create a trip
hajard or where it could
become chafed and create a
fire or electrical hazard.
A
Use only the Uniden AC
adaptor supplied with this
phone. Make sure it is
switched ON at all times.
DESK INSTALLATION
Your DS70 can be fitted with a Desk Stand or mounted on the wall.
. Thread both the telephone line cord and the power cord through the semi-circle
hole in the back of the Desk Stand,
. Insert the two tabs, located on the base of the Desk Stand, into the slots on the
bottom of the Base Unit.
. Push down gently until the tab locks into the top of the Base Unit.
• Now connect the telephone line cord and AC power cord into the Base Unit as
shown on page 8.
WALL INSTALLATION
Your DS70 can be wall mounted on a standard telephone wall plate.
. Do not install the desk stand.
. Now connect the telephone line cord and AC power cord into the Base Unit as
shown on page 8.
. Position the Base so the mounting studs on the standard telephone wall plate fit
into the holes on the back of the Base Unit.
• Shde the Base down on the mounting studs until it locks into place.