Cleaning the battery contacts, Handset ringer volume and tone – Uniden DS70 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

T Low battery indicator

The low battery indicator shows when the
battery pack is very low and needs to he charged.

If the phone is not in use, the

Low batt

LED

flashes every four seconds. If the phone is in use,

the

Low batt

LED flashes every four seconds

and the handset beeps. Complete your
conversation as quickly as possible and return
the handset to the base for charging.

▼ Recharging the battery pack

Replace the handset on the base if it’s convenient. However recharging
the battery is only necessary when the Low batt LED is lit.

15 - 20 hours charging is required for a full charge - however it is safe to

leave the handset on the base for longer periods.

CLEANING THE BATTERY CONTACTS

To maintain a good charge, clean all charging contacts on the handset and base

about once a month. Use a pencil eraser or other contact cleaner. DO NOT use
liquids or solvents; you may damage your phone.

HANDSET RINGER VOLUME AND TONE

▼ Adjusting ringer volume

Ensure the handset is in standby mode.

• Press the

Vo i

A or T key on the handset

to set the handset ringer volume.

• The volume will remain on the same setting

when you hang up.

▼ Adjusting ringer tone

There are 4 ringer tones to choose from.

• While in the standby mode, press the

Recall

button.

• Press a key

(1,2,3 or 4)

to select a ringer tone.

1 0

Advertising