Graphic equalizer operation, J display the graphic equalizer curve, 2 select the frequency band to be adjusted – Kenwood KC-993 User Manual
Page 16: O adjust the level of the selected frequency, Create a desired equalizer pattern, 2 press the memory key, 2 press the preset key, To return to the original equalizer pattern
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Graphic equalizer operation
Ea CONTROL keys
■Creating an equalizer pattern
You can create a desired equalizer pattern by operating
the equalizer control keys. Observe the graphic equalizer
display and listen to the sound compensated with equ alizer
effect.
Ci
^
J Display the graphic equalizer curve.
Press the IDISPLAYI key so that the graphic equalizer display
5 in the display window. See page 15.
2 Select the frequency band to be adjusted.
Lower frequency
bands
Higher frequency
bands
O Adjust the level of the selected frequency
lEQ. ONI lights up.
Increase the level.
Decrease the
level.
/ £ ■ / 7
A
Repeat steps 2 and 3 for other frequency
^ bands, if necessary.
■Storing a user-created pattern
Up to 5 equalizer patterns created by you can be stored in
memory.
f------------------------ ^------------
^ Create a desired equalizer pattern.
Refer to “Creating an equalizer pattern”.
2 Press the MEMORY key.
b
mi c
The
I MEMORY, 0] ,[2] 0
and
[s]
indicators blink for about
5 seconds on the display.
2 Press the preset key.
Press while the MEMORY indicator is lit.
b
The pressd preset key memorizes the equalizer pattern.
/-------------------------------------------------------------------------------------------------------
To return to the original equalizer pattern
0 PresstheMANUAL/REFERENCEkeysothatthe IMANU.I
indicator lights.
(D Press and hold the preset key (1-5) for 5 seconds or
more.
16
KC-993 (En)