System control operation, U iii – Kenwood KC-993 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
System control operation
For the system control of KENWOOD system components, connect them using the system control cords as shown in the
illustration below.
If the power cords are connected as shown in the illustration, the power of the whole system can be switched ON/OFF from
the POWER key on the control amplifier.
(For the audio cord connection, please refer to "System connections".}
Turntable
JL
Connect the power cord of the
amplifier to the UNSWITCHED AC
outlet of the tuner.
To AC outlet
AC outlet
Unit destination
Shape of the AC outlet
U.S.A., Canada
and U.S. Military
u III
Australia
o
Other countries
»
SWITCHED AC outlet
The power of the component connected to this kind of AC outlet is
switched ON/OFF in interlocked operation with the POWER key on the
main unit on which the AC outlet is installed.
Note;
Do not connect the system control cord to the cassette deck connected to the TAPE 2/ADAPTOR jacks.
8
KC-993 (En)