System connections, Loudspeakers, Caution – Kenwood DVR-6100 User Manual
Page 12: Turned off, Malfunction of microcomputer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ft
System Connections
Make connections as shown below.
When connecting the related system components, refer also
to the instruction manuals of the related components.
A\
Caution: Read this page carefully to ensure
safe operation.
DvR-605/DVR-6 Ì OOyiJvR-b i OGK iti\
Caution:
Do not plug in the power lead until all connec
tions are completed.
Caution
Be sure to adhere followings. Or proper ventilation will be blocked causing damage or
fire hazard.
• Do not place any objects impairing heat radiation onto the top of unit.
• Leave a space around the unit (from the largest outside dimension including pro
jection) equal or greater than, shown below.
Top panel : 50 cm Side panel : 10 cm Back panel : 10 cm
Malfunction of microcomputer
If
operation
is
not
possible
or
erroneous
display
appears
even
though
all
connec
tions have been made properly, reset the
microcomputer
referring
to
"In
case
of
difficulty".
-¡yS
Loudspeakers
O
Speaker terminal
o
Excessive insertion of the cable can
cause defective contact.
White
tube
The figure shows an example for the speakers for DVR-605.
Connect the speaker cable terminals
to the terminals with the same color
at the speaker terminal panel on the
main
unit.
Connect
matching
the
color of the speaker terminal (+ side)
and the color of the speaker cable
tube.
Speaker
Color of the speaker terminal
panel on the main unit
Front right
Red
Center
Green
Front left
W hite
Surround right
Gray
Subwoofer
Purple
Surround left
Blue
Surround
speaker
L
Subwoofer
Speakers for DVR-6100/6100K
The power in this equipment will not be completely cut
off from the AC wall outlet when the main switch is
turned OFF.