Kenwood DVR-6100 - Manual (Page 56)

g Sfteaker setting
Changwo the INPUT MODE
n-OUD/'L/vn-t;
Level setting using a music source
A music source can be used for speaker level setting and subwoofer level setting.
Speaker level adjustment can be performed by
pressing the keys FRONT, CENTER, REAR, and SW.
F: Front speakers
Switching is done as follows each time the switch
is pressed.
• (D L ch : Left speaker
- @ Fi ch : Right speaker
C: Center speaker
R: Rear (Surround) speakers
Switching is done as follows each time the switch
is pressed.
■ © LS ch : Left surround speaker
■ @ RS ch : Right surround speaker
SW: Subwoofer
F;
::
The speaker level can be changed In the range from -10
dB to -1-10 dB.
The input mode can be switched with SAT/CABLE and FRONT. For better sound quality, connect the digital output of
your component with a coaxial or optical cable and change the input mode as follows.
O
Select the SAT, CABLE or FRONT key.
@ Press the INPUT MODE key.
INPUT MODE
RANDOM
When the video Is displayed, but no sound is put
fSTogjl out, the source may not contain digital audio. In such
a case, please switch to ANALOG.
AUTO input mode only checks the Input signal when the
IN PUT Is changed. The input does not automatically switch
from digital (optical/coaxial) to ANALOG when the digital
signal from the source component stops. In this case, use
the remote to select ANALOG Input mode.
Each press switches the mode.
SAT/CABLE input
© AUTO
@ COAXIAL
L- © ANALOG
FRONT input
© AUTO
© OPTICAL
© ANALOG