Using the on-screen banner display, Changing the camera angle, Nosing introsnan function – Kenwood DVR-6100 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the
DVR-605/DVR-6100/DVR-6100K (EN)
€Ss>
Changing the Camera angle
ccb
^
c
®
nosing introSnan function
Some disc contains multipie angles in particular scene
or sequence. If the disc only has one angle, this feature
won't work.
Using the on-screen banner display
O During playback, press the ON SCREEN key.
[MAIN UNIT]
I
REMOTE
I
ON SCREEN
ON SCREEN
© Press the Cursor left/right (◄/►) keys until the
ANGLE icon is highlighted.
[MAIN UNIT
i REMOTE |
© Press the ENTER key.
MAIN UNIT
I
I
REMOTE
; :—^—1
1 1
©Press the ENTER key repeatedly to select the
angle.
[
main
unit
!
I REMOTE |
• The menu is switched off when no operation is
performed for about 5 seconds.
IntroScan plays the first few seconds of each track on
only one disc similar to the scan feature that's on many
car radios.
Using the on-screen banner display
O
During playback, press the ON SCREEN key.
[MAIN UNIT
I
I
REMOTE
I
ON SCREEN
ON SCREEN
©Press the Cursor left/right (-«/►) keys until the
IntroScan icon is highlighted.
[MAIN UNITl
I
REMOTE
I
© Press the ENTER key.
I MAIN UNIT]
REMOTE
I
• The first 10 seconds of each track play.
• After Intro Scan goes through all of the tracks, it
stops.
• If you want to stop IntroScan while it's in progress,
just press ENTER key on the remote (the current
track starts playing in its entirety).
(When the On-screen display has gone out, press the ON
SCREEN key, select Intro Scan, and press the ENTER
key.)
P.B.C. on mode of VCD, the IntroScan function may
not work.