Connecting to a tv, Connecting to a satellite tuner, I|p| 1 – Kenwood DVR-6100 User Manual
Page 14: L g)j)out
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
System Connections
h-bu5/U'v i^-
6 1
óO/"D'Vi''i-6
Connecting to a TV
Depending on the input switching, the output from the MONITOR OUT terminal will be one of
the following signals. Please note that a different signal type will not be put out.
S-VIDEO terminal
: S-video signals from the internal DVD player.
VIDEO terminal
: Composite video signal connected to the (VIDEO) VCR IN, the (VIDEO) SAT/
CABLE IN, or the FRONT AUX VIDEO terminal.
ANTENN
FM
75
Q
©
fin
OND AM
L
i|P|
1
P!
IT STREAM/PCM
SAT/CABLE '-VCR
OVD COMPONENT
^ L
g)J)oUT
SAT/
^0))jCABLE
/IDEO S-VICSr
COMPONENT Video cord (except for Europe and U.K)
*COMPOSITE Video cord (accessory)
S-Video cord
I
COMPONENT connection corresponds only to some areas.
R)ili When the TV has a COMPONENT terminal, the DVD image will be played
back with higher picture quality in case of COMPONENT connection.
Connect the S-video or the COMPOSITE video cable also in this case.
If your TV has a progressive scan feature -I3£l
Connecting to a Satellite Tuner
* For Europe and U.K. only
If your TV set has a SCART terminal,
connect the accessory SCART plug to the
SCART terminal of the TV and connect
the COMPOSITE video cord.
Satellite tuner