1 1. freeze mode, 1 2. location and function of internal switches – Toshiba IK-542XD User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1 1. FREEZE MODE
When the video signal output is developed in 1/301, 1-field still image is obtained with the
freeze switch (S20l(D) "ON" in 1-pulse trigger SYNC non reset mode or 2-pulse trigger SYNC
non reset mode.
Trigger
П
pulse _______
I L
Video
output
VIDEO 1
VIDEO
INDEX
Exposure
tim e
"U—
1 г
11
-1.5H
1 2. LOCATION AND FUNCTION OF INTERNAL
SWITCHES
Location diagram of the CCU internal switches
Name
Function
Location
S201®~®
1-pulse / 2-pulse trigger
mode setting
Refer to the Table 1.
5201®
Freeze (Note 1)
ON
S201®
Low speed (1/30 second)
shutter (Note 2)
ON
S202
Trigger input
TTL
impedance switch
OPT
S101
Gamma correction switch
1.0
0.45
Note 1:
This is available only when the video signal is developed in 1/301 of either 1-
pulse trigger SYNC non reset mode or 2-pulse trigger SYNC non reset mode.
Note 2:
This is available only when the video signal is developed In 1/301 of the normal
mode with the electrical shutter switch set to "0".
- Important:
When changing the switch setting, always turn off the power, and use an insulated
screw driver, etc.
17