Toshiba IK-542XD - Manual (Page 4)

3. SPECIFICATIONS
Power supply DC12V±10%
Power consumption 4.3W
Image element 1/2 inch, interline transfer CCD
Effective pixels H: 659 pixels, V: 494 pixels
Effective shooting area H: 6.52mm, V: 4.89mm (1/2" type)
Scanning system 2:1 interlaced, non interlaced modes
Scan frequency Horizontal: 15.734 kHz, Vertical: 59.94 Hz
Sync system
Internal/External (automatic switching)
• HD, VD mode
Trigger function
1-pulse / 2-pulse trigger mode
• sync reset mode
• sync non reset mode
• TRIG ~ EXT. VD mode (Only at 1-pulse trigger mode)
Resolution H: 490 TV lines, V: more than 480 TV lines
Normal illumination 400 lx (F4 gamma=0.45, gain SW: off)
Min. illumination 3 lx (FI.4, gamma=0.45, gain SW: on, gain max.)
S/N ratio More than 56 dB (gamma=1.0. weighting filter ON)
Video output 1.0 V(p-p), based on EIA system
Output impedance 75 Q unbalanced
Lens mount M19 (P=0.5) (C-mount conversion ring supplied)
Ambient operating
temperature/humidity
-10 ~ ±50°C / less than 90% relative humidity
Anti-vibration and shock Anti-vibration 70m/s^ (10 ~ 200Hz), Anti-shock 700m/s^
Weight
Camera head: about 25g (without cable)
Camera controller: about 160g
Camera cable
Directly extended from head side
Length: 0.5m, Diameter: 5mm
Dimensions
Camera head: 26 (W) x 22 (H) x 30 (D) mm
(protrusion not included)
Camera controller: 44 (W) x 44 (H) x 77.5 (D) mm
(protrusion not included)
Gain switch OFF (0 dB) /ON (0 ~ +9 dB) internal GAIN VR available
Electronic shutter
1/30S, 1/60S, 1/100s, 1/125s, 1/250S, 1/500s, 1/1000s,
1/1500s, 1/2000S, 1/3000S, 1/4000s, 1/6000s, 1/8000s,
1/10000s, 1/30000S, 1/50000S
Video output switch
1/301 output: EIA standard output (1/30s)
1/60N output: 2 lines parallel output (1/60s)
1/30N output: 1 line sequential output (1/30s)
Applicable regulations CE, FCC Class A, VCCI Class A based
Others Video index output, image output (DC coupled)
Option accessories Extension cable (EXC-7X01: 1.5m), (EXC-7X03: 3m)