Toshiba IK-542XD - Manual (Page 3)

1. COMPONENTS
(1) Camera head................................................................................... 1
(2) Camera control unit....................................................................... 1
(3) C-mount ring................................................................................... 1
(4) Instruction manual............................................................................ 1
(5) Warranty card.................................................................................. 1
2. FEATURES
Full frame shutter camera utilizing a square pixel format.
(1) Square pixel array with a VGA format (progressive scan) CCD employed.
The square pixel format and progressive scan image output make this camera well
suited for the computer environment.
(2) Frame shutter
Ability to capture entire images in one exposure. This effectively doubles the vertical
resolution of the camera.
(3) Odd/Even signals output at the same time.
Full frames can be output in 1/60 second, twice as fast as conventional cameras.
(4) Applicable to EIA standard output by memory as standard equipment.
Since the field memory is standard equipment, the unit is applicable to EIA standard
output. This allows you to use the picture processing devices and monitor, etc. that
you presently use. (The exposure Interval is 1/30 second.)
(5) 1-pulse trigger mode
With the 1-pulse trigger mode exposure can be activated by a single pulse at asyn­
chronous intervals.
(6) 2-pulse trigger mode
The exposure time is determined by the width of 2 pulse with the 2-pulse trigger
mode, also this is available on a long exposure time over 1/60 second.
(7) Electrical shutter speeds
15 Shutter speeds are available allowing exposure time to be set in discrete inter­
vals.
(8) Small sized camera head of 26mm(W) x 22mm(H) x 30mm(D) allows installation in a
very small space.
(9) C-mount lens
A C-mount ring is supplied so that widely available C-mount lenses may be used.
(10) Gold plated 12 pin connector
Power, outputs and inputs are available on one convenient connector to allow com­
plete wiring with only one cable.