Dvd player + tv + vcr, Connectons & setup – RCA RC5227P User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connectons & Setup
DVD Player + TV + VCR
1. Connect the audio cables to the AUDIO OUT FRONT L (left - white) and R (right - red) jacks
on the back of your DVD Player, and to the corresponding Audio Input jacks on your TV.
2.
Connect the video cable.
• Basic video connection
- Connect the video cable (yellow) to the VIDEO OUT jack on
the back of your DVD Player, and to the Video Input jack on your TV.
OR
• S-Video
- (optional) If your TV has an S-Video Input jack, connect the S-Video cable to the
S-VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If
your TV doesn’t have S-Video, use the basic video connection listed above.
OR
• Component video
(optional) - If your TV has component video (Y, P^, and P^ jacks) use
video-grade cables for the Y, P^, and P^ connections. Note that it is essential to match the
color coded connectors with a compatible TV. If your TV doesn’t have component video,
use the basic video Connection listed above.
3
. Connect a coaxial cable to the antenna output jack on the VCR and to the antenna input jack
on the television.
4. Connect the antenna or cable to the Antenna Input jack on the VCR.
5. Plug in the AC power cord into an AC outlet.
Go to page 21
Chapter 1
11