RCA RC5227P - Manual (Page 81)

TruSurround®
The TruSurround® option can he used to simulate a six-speaker listening experience through two speakers. It can be turned
on or off. The default is off. To turn the TruSurround® ciption on:
1. From the Sound menu, highlight the 7niSurround option and pres.s OK.
2. Highlight On and press OK,
3. Press the left arrow key to return to the previous menu.
Notes:
The TruSurroinuT opiivn should not he lunted on if you are using a Dolby Digital or DTS receiver. Your receiver
provides optimum sound cptality.
The TS Surround button on the Front Panel of the DVD Player can he also he used to change the TniSurrouncP'
setting. Each press of the button toggles the setting between on and off.
______________Using the PVP Player^s iVleim System
ilintlMltd
¿p/down tliCjSlitetpf.thelriirnt’ ’
' ^i^eted to yoirr’sy»rem: oic to- «e№cr ■
Use this Speakers menu to select
and set up your attached speakers.
Speaker Setup
1. From the Sound menu, highlight the Speaker Setup option and press
OK (the Speaker Setup menu is displayed).
2. Highlight the Speakers option and press OK. (The Speaker Size
screen will be displayed. Representations of different types of
speakers will be displayed on the right side of the screen.)
3. Highlight Front, Center, Subwoofer ot Surround. The highlighted
choice will also be highlighted in the graphic to the right of the list.
4. Use the right arrow button to move to the Speaker Size list
(underneath the graphic on the right). Select the size of your
speakers (or None if you don’t have that type of speaker hooked up)
and press OK.
5. Use the left arrow button to return to the speaker list and select the
next type of speaker, repeating the process above.
TruSurround and the C«) symbol are trademarks of SRS Labs, Inc. in the United States and selected foreign
countries. TruSurround technology is incorporated under license from SRS Labs, Inc.
Chapter 6 79