Toshiba TEC MA-230 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TABLE OF OPERATIONS FOR X AND Z REPORTS -- Continued --
REPORT NAME
KEY OPERATION
AUTO READ AND RESET
Mode Lock:
X ^
Mode Lock: Z —'
(DEPARTMENT + FINANCIAL + CLERK
+ DEPT GROSS PROFIT)
—
^
~
Print/Non-print Selective
AUTO READ
AUTO RESET
GT READ AND RESET (Accumulated Data)
* AUTO GT READ
* AUTO GT RESET
DEPARTMENT GROSS PROFIT GT READ
M^d:
z >
Mode Lock: X -► 22 [AT/TL]
NOTES 1. The drawer will open on the depression of the final key of the
KEY OPERATION for the reports marked with
in the above table.
2. No Clerk Key is necessary to issue reports except CLERK READ AND
RESET.
3. Refer to the report samples on the following pages. As for the
program data reading, which is available in the "X" mode, see the
"VERIFICATION OF PROGRAMMED DATA" in the PROGRAMMING MANUAL.