Toshiba TEC MA-230 - Manual (Page 6)

CONTROL LOCKS AND MODE SELECTOR KEYS
MODE LOCK (POSITION) (FUNCTION)
LOCK-fe Vz
SET
LOCK ... Displays the current time. The register
operations are locked when the Mode Lock
is set to this position. Paper feeding
(using [RF] or [JF] key) will not be
allowed, either.
REG ,,,, Normal cash register operations are
carried out in this mode, requiring one
of the Clerk Keys to be set to ON. The
operations programmed to require the
"MGR" position cannot be performed in
this mode.
X
MGR
[I]
SET
The sale totals can be read and the
programmed data can be verified in this
position.
This position allows to register all
normal cash register operations to be
carried out in the "REG" mode and the
operations programmed to require the
"MGR" position. A Clerk Key is also
required.
This is the "Negative Mode", which
automatically processes all the entries
in the reverse way, i.e., positive items
into negative, and the negative items
into positive. A Clerk Key is also
required.
All resettable totals and their
respective counters will be read and
reset in this position.
In this position, the register will allow
programming operations.
REG Key The REG Key is used by the cashier who operates the
register. This key can access the positions of LOCK
and REG.
MGR Key The MGR Key is used by the store manager or a pr
authorized by the manager. This key can access
positions of LOCK, REG, X, and MGR.
MA Key The MA Key is used by the store manager who will daily
supervise the collection of money and the printout of
transactions recorded by the register. This key can
access the positions of LOCK, REG, X, MGR,
CZl
> and Z.
^ SET Key The SET Key is used by the programmer,
access the positions of LOCK and SET.
This key can