Clerk keys (cll, cl2, cl3, cl4) – Toshiba TEC MA-230 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CLERK LOCKS (standard type)
These locks are used to identify which
clerk is operating the register.
T
»2
3*4
Clerk Keys (CLl, CL2, CL3, CL4)
Each clerk should keep his/her clerk key. The register
will not operate in the REG, MGR, or Q mode unless one
of these keys is inserted and set to the corresponding
position on the Clerk Locks, Each of the keys may be
inserted and pulled out in the neutral position marked
with (point) in the above figure.
PUSH-STYLE CLERK KEYS (optional type)
1
2
3
4
5
6
These keys are the alternative option
with the "CLERK LOCKS" and "Clerk
Keys" described above.
The register will not operate unless
one of these keys (1, 2, 3 .....6) is
pushed down. Pushing the same key
again or pushing down another key will
make the first key come up to regain
to the OFF position.