To select a 7l/f/z) no, L/f/z) no – RCA CC643 User Manual
Page 52
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
JLIP (Joint Level Interface Protocol) Identification Number
The camcorder has a
JLIP
connector that may be used in the future to connect a
device, such as a home computer.
To Select a
7
L/F/Z) NO.
1. Place the POW E/? switch in CAM
ERA.
The power indicator will light.
2. M ake sure the
AE
dial is not set to
AUTO.
3. Press the M £7V[/button. The
recording menu will appear in the
viewfinder.
4. Press + or - to select a
JLIP ID NO.
GAIN UP
MAX
TELE MACRO
OFF
INTERVAL TIMER
OFF
RECTIME
OFF
JLIP ID NO.
07
SET CHARACTER
DATEmME
END :MENU KEY
5.
Press ◄ or ► in the center of the AP
dial to select a number from 01 to 99.
Use the number you select to identify
your camcorder if you connect it to a
computer using the
JLIP
connector.
53