Playback on tv (or vcr) y/\xh audio/video /v jacks, Installation – RCA CC643 User Manual
Page 61
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playback on TV (or VCR) y/\Xh AUDIO/VIDEO /V Jacks
To connect your camcorder to a TV monitor (or VCR) with
AUDIO/VIDEO
/V jacks,
you will need an optional audio/video cable such as VH83
shown on page 68.
If your
TV is already connected to a VCR, you can attach the camcorder to the VCR and watch
what the camcorder is recording or playing on the TV.
Back of
Mono VCR or
TV Monitor
White
Audio Plug
AudioA^ideo
Output Cable
(Optional)
AUDIO Jack
Yellow Video Plug
— OR —
Back of
Stereo VCR or
TV Monitor
Y-Adapter
(Optional)
I
White
Audio
Plug
AudioA^ideo
Output Cable
(Optional)
VIDEO Jack
Yellow Video Plug
Installation
1.
Attach the white plug on one end of
the audio/video cable to the A t/D/O
/V jack on the TV (or VCR).
Notes: If your cable does not have white
and yellow plugs, just be sure to attach the
same color to the audio jacks.
If your TV (or VCR) has stereo AUDIO IN
jacks, attach the plug to the one labeled
MONO. If one is not labeled MONO, you
may need a Y-adapter, such as AH25,
shown on page 68 to hear both channels.
2
.
3.
4.
Attach the yellow plug to the
VIDEO
7V jack on the TV (or VCR).
Attach the white plug on the other end
of the audio/video cable to
ihc AUDIO
jack (located under the small cover)
on the side of the camcorder.
Attach the yellow plug to the yellow
V7D£(9 jack on the camcorder.
62