RCA CC643 - Manual (Page 54)

Attaching the Shoulder Strap
The camcorder’s shoulder strap is designed to let you carry the camcorder from
your shoulder and - when you are ready to shoot - bring the camcorder to shooting
position in one quick movement.
To Attach the Shoulder Strap
1. If the strap keeper
is over a double
section of the
strap, slide the
strap keeper off the
end of the strap.
Replace the keeper
on the strap
between the buckle
and the end of the
strap as shown.
Keeper
2. Loop the end of the strap over the top
of the shoulder strap attachment ring.
3. Thread the end of the strap back
through the keeper and buckle making
sure it is threaded under the outer
strap. M ake sure the strap is not
twisted.
4. Attach the other end of the strap to the
other shoulder strap attachment ring.
5.
6
.
Adjust the shoulder strap to the
desired length.
Slide both keepers up snugly against
the shoulder strap attachment rings to
prevent the strap from slipping.
Cautions: W hen carrying the
camcorder I with the shoulder strap, you
may find it convenient to rotate the
viewfinder down and slide it to the
front. This helps prevent possible
damage to the viewfinder from bumping
against your body as you move.
M ake sure the shoulder strap is firmly
attached before using it to carry the
camcorder.
55