Toshiba MA-191 User Manual
Page 57
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
NOTES:
1.
Among
ITXI/Ml
(ITX/M[).
ITX2/
m
1.
and
|SI/
m
|.
depress
the key(s) for the required status change(s) for each
department. The IRTN MDSE | is depressed to set or reset
the negative DEPT status.
2.
Depressing any of the three keys above,
status
reverses.
For
example,
depressing
reverses a non-taxable DEPT to a taxable,
to
non-taxable.
Each
department
status
is
number
indicated
on
the
display
when
ment key is depressed in tlie aixve cperaticn.
and their respective statuses are:
the related
the rxx 7
m
1
or taxable
read by the
each depart-
The numbers
Non-taxable, no S.I. status
Tax
Tax
Tax
S.I,
Tax
Tax
Tax
1 only
2 only
1 and Tax
only
1 and S.I,
2 and S.I,
1 and Tax
2 and S.I.
Watching
the
number,
adjust
the
status
by
depressing
those keys. See the examples below:
'STATUS NUMBER
BEFORE
change
'
0
0
0
KEY-IN FOR CHANGE
PRIOR TO [
dept
]KEY
ITXI/Ml
[TXI/MIITX2/MI
NEW NUMBER AND
STATUS OBTAINED
I f x i / M l I S I / M l
KTaxl only)
3(Taxl and Tax2)
5{Taxi and S.I.)
etc.
ITXI/Ml
|TX2/M|
iTXl/Ml|TX2/M|
0(Non-txbl,no SI)
3(Taxl and Tax2)
2(Tax2 only)
etc
jTXl/Ml
ÏÏÏHKi
6(Tax2 and S.I.)
3(Taxl and Tax2)
etc.
3. In order to simplify the status setting operation, each
department status may be reset to "0" by entering "0"
and depressing the department key. (This can only be
done after a GTZ reset and a PLU Z reset.) Then the
required status is set simply by depressing the keys
ITXI/Ml ( f T X / M l ) , |TX2/M[, and/or |SI/M|, only once.
- 53 -