RCA LCD L26HD35D - Manual (Page 26)

Resetting your settings
The Reset function returns your settings to the
factory settings.
1 Press SETUP/TV MENU in the TV mode. The TV
menu screen will appear.
2 Press A or T to select “Setup”, then press ► or
ENTER.
3 Press A or T to select “Reset”.
Press ► or ENTER to return your settings to the
factory settings.
“Reset” will appear on the screen approx. 3
seconds, then it returns to the normal screen.
NOTE:
• “Picture Size” in Picture menu cannot be reset by
this function.
• “MTS”, “Audio Language” and “HDM11 Audio” in
Audio menu cannot be reset by this function.
Preparation
The following pages describe the setup/
operation in DVD mode.
Preparation
Before DVD/CD operation, please make the following
preparations.
1
Insert the AC cord plug into a standard 120V
60Hz polarized AC outlet.
• If the AC cord plug is plugged in for the first
time, wait for about 5 seconds before pressing
POWER.
NOTE:
• When connecting to other equipment, unplug
the unit from the AC outlet.
Press POWER on the unit or on the remote
control to turn on the unit. The POWER indicator
will change to green.
• Each time you turn the unit ON, theTV/DVD
starts from the TV mode.
• When using an amplifier, switch on the amplifier.
Press TV/DVD to select DVD mode.
The DVD startup screen will appear on the screen.
NOTE:
• If the unit does not operate properly:
Static electricity, etc., may affect the player’s
operation. Disconnect the AC power cord once,
then connect it again.
Status display of disc
Press DISPLAY. The status display of the disc will
appear on the screen.
ELAPSED TOTAL
DISC OPERATION TIME TIME
ANGLE NO. I I SUBTITLE LANGUAGE
AUDIO LANGUAGE A KIND OF AUDIO
To make the status display screen disappear, press
DISPLAY again.
Playback procedure
1
26
Press TV/DVD to select DVD mode.
Place the disc in the
disc slot with the label
side facing forward. (If
the disc has a label.)
Hold the disc without
touching either of its
surfaces, align it with
the guides, and place it
in position.