Note, Marking desired scenes, Marking the scenes – RCA LCD L26HD35D User Manual

Page 31: Changing soundtrack language

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

A-B Repeat Playback:

A-B repeat playback allows you to repeat material

between two selected points.

1 Press REPEAT A-B during playback.

The start point is selected.

Press REPEAT A-B again.

The end point is selected. Playback starts at the

point that you selected. Playback stops at the end
point, returns to Point A automatically, then starts

again.

3

To resume normal playback press REPEAT A-B

again.

Off ” appears on the screen.

NOTE:

• Some discs may not work with the repeat operation.
• In A-B repeat mode, subtitles near point A or B may

not appear.

• During the A-B Repeat Playback the ANGLE

feature will not operate.

• You may not be able to set A-B Repeat, depending

on the scenes of the DVD.

• A-B Repeat does not work with an interactive DVD,

MP3/WIVIA/JPEG-CD.

Marking desired scenes

The TV/DVD stores the points that you want to

watch again.You can resume piayback from that
scene.

Marking the scenes:

1

Press MARKER during playback.

2

Select the blank Marker using

a

or

t

,

then press

ENTER at the desired scene.

I Marker 1 00

2/

54 1

Marker

2

Markers —

• Up to 3 scenes can be selected.
• Repeat this procedure to set the other 2

scenes.

3

Press MARKER to remove this display.

Returning to the scenes:

1

Press MARKER during playback or stop mode.

2

Press A or T to select the Marker 1-3.

Marker 1

00 :27 :54

1 Markers

01 :16 :25 I

Marker 3

02 :08 :31

3 Press ENTER.

Playback starts from the marked scene.

To cancel the mark:

1

Press MARKER during playback or stop mode.

2

Press A or T to select the Marker 1-3.

3

Press CANCEL.
Press MARKER to remove this display.

NOTE:

• The marking is canceled when you eject the disc or

turn the power off.

• Some subtitles recorded around the marker may fail

to appear. [DVD]

Changing soundtrack
language______________

You can select the language when you play a

multilingual disc.

1 Press AUDIO during playback.

The current soundtrack language will appear.

i1/2

Eng Dolby Digita

2 Press AUDIO repeatedly until the desired

language is selected.

The on-screen display will disappear after a few
seconds.

NOTE:

• If the desired language is not heard after pressing

AUDIO several times, the language is not recorded
on the disc.

• Changing soundtrack language is cancelled when

you eject the disc.

The initial default language or available language

will be heard if the disc is played back again.

31

Advertising