Chrysler 2008 Sebring Convertible - Manual (Page 258)

4 Speed or 6 Speed (AutoStick
ா
) Automatic
Transaxle
The electronically controlled transaxle provides a precise
shift schedule. The transaxle electronics are self-
calibrating; therefore, the first few shifts on a new vehicle
may be somewhat abrupt. This is a normal condition, and
precision shifts will develop within a few hundred miles.
Gear Ranges
“P” PARK
“P” PARK supplements the parking brake by locking the
transaxle. The engine can be started in this range. Never
attempt to use “P” PARK while vehicle is in motion.
Apply parking brake when leaving vehicle in this range.
When parking on a flat surface, place the selector lever in
the “P” PARK position first, and then apply the parking
brake.
When parking on a hill, it is important to set the parking
brake before placing the selector lever in “P” PARK,
otherwise the load on the transaxle locking mechanism
may make it difficult to move the selector out of “P”
PARK. As an added precaution, turn the front wheels
toward the curb on a downhill grade and away from the
curb on an uphill grade.
Selector Lever
258 STARTING AND OPERATING