Chrysler 2008 Sebring Convertible - Manual (Page 26)

Programming Additional Transmitters
Refer to SENTRY KEY
௡ “Customer Key Programming.”
If you do not have a programmed transmitter, contact
your dealer for details.
Battery Replacement
The recommended replacement battery is CR2032.
NOTE:
• Perchlorate Material — special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate.
• Do not touch the battery terminals that are on the back
housing or the printed circuit board.
1. With the transmitter buttons facing down, use a flat
blade tool to pry the two halves of the transmitter apart.
Make sure not to damage the seal during removal.
2. Remove and replace the batteries. Avoid touching the
new batteries with your fingers. Skin oils may cause
battery deterioration. If you touch a battery, clean it with
rubbing alcohol.
3. To assemble the transmitter case, snap the two halves
together.
Battery Service
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE