Parking brake – Chrysler 2008 Sebring Convertible User Manual

Page 264

Advertising
background image

• Transaxle shifting will be more noticeable when

Autostick

௡ is engaged.

• If a low range is selected and the engine accelerates to

the rev limit, the transaxle will automatically select the
next higher ratio.

• If a downshift would cause the engine to over-speed,

that shift will not occur until it is safe for the engine.
Mostly the transaxle will stay in the manually selected
ratio, however:

− If the system detects powertrain overheating, the

transaxle will revert to the automatic shift mode and
remain in that mode until the powertrain cools off.

− If the system detects a problem, it will disable the

AutoStick

௡ mode and the transaxle will return to the

automatic mode until the problem is corrected.

PARKING BRAKE

The parking brake should always be applied when the
driver is not in the vehicle.

WARNING!

Never use Park position on an automatic transaxle as
a substitute for the parking brake. Always apply
parking brake fully when parked to guard against
vehicle movement and possible injury or damage.

When parking on a flat surface, place the gear selector
lever in the “P” (Park) position first, and then apply the
parking brake.

264

STARTING AND OPERATING

Advertising