Chrysler 2008 Sebring Convertible - Manual (Page 401)

BULB REPLACEMENT
Low Beam Headlight, High Beam Headlight
1. Open the hood.
NOTE: It may be necessary to remove the air cleaner
filter housing and position the totally integrated power
module aside prior to replacing the low beam headlight
on the driver’s side of the vehicle.
2. Rotate the applicable bulb and connector assembly 1 ⁄
4
turn counterclockwise and remove the assembly from the
headlight housing.
3. Disconnect the bulb from the harness connector and
then connect the replacement bulb.
1 — High Beam Headlight
2 — Low Beam Headlight
MAINTAINING YOUR VEHICLE 401
7