Selection of engine oil for flexible fuel, Vehicles (e-85) and gasoline vehicles – Chrysler 2008 Sebring Convertible User Manual

Page 314

Advertising
background image

For best results, a refueling pattern that alternates be-
tween E-85 and unleaded gasoline should be avoided.
When you do switch fuels, it is recommended that:

• you do not switch when the fuel gauge indicates less

than

1

4

full

• you do not add less than 5 gallons when refueling
• you operate the vehicle immediately after refueling for

a period of at least 5 minutes

Observing these precautions will avoid possible hard
starting and/or significant deterioration in drivability
during warm up.

NOTE:

When the ambient temperature is above 90° F

(32° C), you may experience hard starting and rough idle
following start up even if the above recommendations are
followed.

Selection Of Engine Oil For Flexible Fuel Vehicles
(E-85) and Gasoline Vehicles

FFV vehicles operated on E85 require specially formu-
lated engine oils. These special requirements are included
in Mopar

௡ engine oils, and in equivalent oils meeting

DaimlerChrysler Specification MS-6395. The manufac-
turer only recommends engine oils that are API Certified
and meet the requirements of Material Standard MS-
6395. MS-6395 contains additional requirements, devel-
oped during extensive fleet testing, to provide additional
protection to DaimlerChrysler Corporation engines. Use
Mopar

௡ or an equivalent oil meeting the specification

MS-6395.

NOTE:

Your engine oil filler cap also describes the

correct engine oil to use.

314

STARTING AND OPERATING

Advertising