Dhcp server configuration – Comtrol ES7506 User Manual
Page 49
RocketLinx ES7506 User Guide: 2000529 Rev. F
DHCP Server Configuration - 49
Configuration Using the Web Interface
DHCP Server Configuration
Use this page to configure DHCP server services.
DHCP Server Configuration Page
DHCP Server
You can select to Enable or Disable the DHCP Server function. The ES7506
assigns a new IP address to link partners.
DHCP Server Configuration
Network
Enter the IPv4 address for the DHCP server.
Subnet Mask
Enter the subnet mask for the DHCP server.
Default Gateway
Enter the IP gateway address for the DHCP server.
Lease Time
Enter the Lease Time in seconds for the client.
Apply
Click Apply to apply the settings.
Note: You must Save the settings (
), if you want to maintain these
settings if the ES7506 is powered off.
Excluded Address
IP Address
You can type a specific address into the IP Address field for the DHCP server
reserved IP address.
The IP address that is listed in the Excluded Address List Table is not assigned
to the network device. Add or remove an IP address from the Excluded Address
List by clicking Add or Remove.