Local using the ip address or mac address, Local using, The ip address or mac address – Comtrol UP 16-Port User Manual
Page 32
32 - Managing the DeviceMaster UP
DeviceMaster UP 16-Port Hardware User Guide: 2000596
Rev. B
Managing the DeviceMaster UP
7.
Enter the IP Address for the DeviceMaster UP. It is not necessary to enter the
Subnet Mask and Default Gateway.
8.
Click Ok to close the Add New Device window. It may take a few moments to
save the DeviceMaster UP.
9.
If necessary, click Refresh for the new DeviceMaster UP to display in the
Device Tree or Device List panes. The DeviceMaster UP shows OFF-LINE if it
is not attached to the network or if an incorrect IP address was entered.
Local Using the IP
Address or MAC
Address
Use the following procedure to add a local DeviceMaster UP to PortVision DX if
you do not want to scan the network.
1.
Locate the network information or MAC address of the DeviceMaster UP you
want to add.
2.
Access the New Device window using one of these methods:
•
Click Add New > Device in the Manage menu.
•
Right-click a folder or a RocketLinx switch in the Device Tree pane
(anywhere in the pane, as long as a DeviceMaster UP is not highlighted and
you are in a valid folder) and click Add New > Device.
3.
Select the DeviceMaster UP in the Device Type drop list.
4.
Select the appropriate model in the Device Model drop list.
5.
Enter a friendly device name in the Device Name list box.