Configuration – Cisco WEC600N User Manual
Page 24
Chapter 3
Configuration
23
Dual-Band Wireless-N ExpressCard
Certificate
Select the certificate you installed to
authenticate you on your wireless network. If you want to
use any certificate, keep the default, Trust Any.
Inner Authen.
Select the authentication method used
inside the PEAP tunnel.
Click Next to continue, or click Back to return to the
previous screen.
RADIUS
RADIUS features use of a RADIUS server. (This should only
be used when a RADIUS server is connected to the router.)
RADIUS offers two authentication types: EAP-TLS and
PEAP.
Authentication
Select the authentication method your
network is using, EAP-TLS or PEAP.
EAP-TLS
RADIUS - EAP-TLS
If you selected EAP-TLS, configure the following:
Login Name
Enter the login name of your wireless
network.
Server Name
Enter the name of the authentication server
(this is optional).
Certificate
Select the certificate you installed to
authenticate you on your wireless network.
Click Next to continue, or click Back to return to the
previous screen.
PEAP
RADIUS - PEAP
If you selected PEAP, configure the following:
Login Name
Enter the login name of your wireless
network.
Password
Enter the password of your wireless network.
Server Name
Enter the name of the authentication server
(this is optional).
Certificate
Select the certificate you installed to
authenticate you on your wireless network. If you want to
use any certificate, keep the default, Trust Any.
Inner Authen.
Select the authentication method used
inside the PEAP tunnel.
Click Next to continue, or click Back to return to the
previous screen.
The
6.
Confirm New Settings screen appears.
Confirm New Settings
To save the new settings, click Save. To edit the new
settings, click Back. To exit Advanced Setup through
the Monitor, click Exit.