Component locations – Digilent 410-044-10P-KIT User Manual
Page 9
Spartan-3 Starter Kit Board User Guide
9
UG130 (v1.1) May 13, 2005
1-800-255-7778
Component Locations
R
•
50 MHz crystal oscillator clock source (bottom side of board, see
Figure 1-3
)
•
Socket for an auxiliary crystal oscillator clock source
•
FPGA configuration mode selected via jumper settings
•
Push button switch to force FPGA reconfiguration (FPGA configuration happens
automatically at power-on)
•
LED indicates when FPGA is successfully configured
•
Three 40-pin expansion connection ports to extend and enhance the Spartan-3 Starter
Kit Board
♦
See
or compatible expansion cards
♦
Compatible with Digilent, Inc. peripheral boards
♦
FPGA serial configuration interface signals available on the A2 and B1 connectors
-
PROG_B, DONE, INIT_B, CCLK, DONE
•
JTAG port
for low-cost download cable
•
Digilent JTAG download/debugging cable connects to PC parallel port
•
JTAG download/debug port compatible with the Xilinx Parallel Cable IV and
MultiPRO Desktop Tool
•
AC power adapter input for included international unregulated +5V power
supply
•
Power-on indicator LED
•
On-board 3.3V
, 2.5V
, and 1.2V
regulators
Component Locations
Figure 1-2
and
Figure 1-3
indicate the component locations on the top side and bottom side
of the board, respectively.
14
15
16
17
18
19
20
21
22
23
23
24
25
26
27
28
29