Ecler CA200z - Manual (Page 38)

38
Nota: En el modo ZONES el ajuste detallado VOL de las entradas MIC se realiza de forma
independiente para la zona seleccionada, A o B: una misma fuente sonora MIC puede ser
ajustada con diferente volumen para las zonas A o B (pero mismo ajuste de tonos BASS /
TREBLE para ambas zonas de destino). En los modos STEREO, MONO y BRIDGE (zona única)
los ajustes detallados son comunes, pues no existen zonas a las que direccionar y ajustar de
forma independiente las fuentes sonoras.
VOL
Rotate knob
to adjust
level
Front knob SP: Short Press (press the front panel knob briefly, less than 0.5 seconds)
Front knob LP: Long Press (press & hold the front panel knob for more than 2.5 seconds)
MICx VOLUME
Level: 0 to 64
LP to enter
the VOLUME
adjust mode
LP
BASS
TREBLE
Front panel MIC sources setup
Level
shown in
LCD
To enter the MIC SETUP MODE, first select zone A or B with a tap of the front knob or
the IR remote (only when using the ZONES mode), then press MIC1 or MIC2 key and
hold it for more than 2.5 seconds
Press & hold MICx key
to enter MICx setup mode
MICx setup mode
(x = 1, 2, 3 or 4)
Default mode (STEREO / MONO / BRIDGE / ZONE A or ZONE B)
SP to get
back
Rotate knob
to browse
options
SP to get
back
Level
shown in
LCD
LP
LP to enter
the BASS
adjust mode
MICx BASS
Level: -10 to +10
Rotate knob
to adjust
level
Rotate knob
to browse
options
Rotate knob
to adjust
level
MICx TREBLE
Level: -10 to +10
LP to enter
the TREBLE
adjust mode
LP
Level
shown in
LCD
Rotate knob
to browse
options
MIC1 or MIC2
LP
Press and hold MIC1 + MIC2 +
front panel knob to enter the
MIC SETUP ADVANCED MODE
Rotate knob
to browse
options
ADVANCED MODE
KEY CODE REQUIRED
MIC1 MIC2
+ +
SP to get
back
SP
SP
SP
SP