Ecler CA200z - Manual (Page 90)

90
8. TECHNICAL CHARACTERISTICS 8. CARACTERÍSTICAS TÉCNICAS
8. CARACTÉRISTIQUES TECHNIQUES 8. TECHNISCHE DATEN
POWER (each output)
70W@4  1% THD
38W@8  1% THD
BRIDGE 97W@8  1% THD
Damping Factor 1kHz @ 8  >140
Frequency response 15Hz - 40kHz (-3dB)
THD+Noise @ 1kHz Full Pwr. SPKR OUT <0.08%
THD+Noise AUX OUT <0.03%
Channel crosstalk @ 1kHz >60dB
Inputs Sensitivity nom / Impedance LINE 1-4 0dBV (-6dBV*)/>10k 
MIC 1-2 (BAL) -20 to -50dBV/>1k 
CMRR MIC 1-2 (BAL) >65dB @ 1kHz
Outputs Level / Minimum Load AUX OUT -6dBV/10k 
Tone control (LINE & MIC) BASS 100Hz ±10dB
TREBLE 6KHz ±10dB
Signal Noise Ratio LINE >85dB
MIC (BAL) >62dB
Talkover TIME 2 Sec.**
DEPTH -30dB**
Microphone Noise Gate 20-25-30dB below max.**
Phantom voltage +24VDC/8mA max.*
RS-232 DB-9 BAUD RATE 9600 (fixed)
DATA 8 bits
PARITY NONE
STOP BITS 1
FLOW CTRL NONE
ANALOG REMOTE 1-2 (0-10V. based) Volume & Input selection
INFRARED REMOTE Preset, Source & Volume
Mains 90-264VAC 47-440Hz
Power consumption (pink noise, 1/8 power @ 4ohm) 62VA/30W
Power consumption (pink noise, 1/3 power @ 4ohm) 78VA/61W
Power consumption (max. @ 4ohm) 240VA/160W
Power consumption Stand By (time 2 minutes) <8W
Dimensions WxDxH 210x230x88mm
Weight Net 2340g
Gross 3550g
*Internally selectable
**Software selectable