Ecler HMA180 - Manual (Page 5)

5
3. INSTALLATION
HMA180 is a self-powered mixer especially designed for its installation in 19" rack cabinets or on
desktops, occupying two units of space.
You need to bear in mind two points when positioning your HMA180 unit: maximum ease-of-use
and allowing easy access for input and output connections.
The unit must be placed away from noise sources (dimmers, motors, etc.) and network cables.
A 4A timed network fuse is built-in to protect the unit against overloads. If it blows, it will be replaced
with another fuse of identical characteristics. IN NO CASE MUST A HIGHER VALUE FUSE BE
INSTALLED.
CAUTION: Only qualified technical personnel may replace fuses.