EVCO EVCSR818P9EF - Manual (Page 13)

EVCO S.p.A. Vcolor 818 | Installer manual ver. 1.1 | Code 144VC818E114
page 13 of 94
4 ELECTRIC CONNECTION
4.1 Electric connection
The following drawing illustrates the Vcolor 818 electric connection.
The utility managed by the K7 output, depends on parameter u11, as follows:
- cabinet light (u11 = 0, pre-defined setting)
- UV light (u11 = 1).
For the settings relative to the parameters, see chapter 11 “CONFIGURATION”.
The utility managed by the K8 output, depends on parameter u1, as follows:
- pump down valve (u1 = 0, pre-defined setting)
- alarm (u1 = 1).
For the settings relative to the parameters, see chapter 11 “CONFIGURATION”.