EVCO EVCSR818P9EF User Manual
Page 56
EVCO S.p.A.
Vcolor 818
| Installer manual ver. 1.1 | Code 144VC818E114
page 56 of 94
9.3
Deleting the information relative to the HACCP
alarms
Operate as follows:
1.
Make sure the device is in the "on" status.
2.
Make sure that the keyboard is not locked and that no procedure is in progress.
3.
Press and release the HOME key (1), press and release the MENU key (2) and then press and release the key (3)
in order to select the “HACCP”.
4.
Press and release the key (5) or the key (6) to select “DELETE RECORDING”, and then press and release the
key SET (4).
5.
Press and release the key + (7) to set “149” and then press and release the key SET (4), to delete all
recordings.
Operate as follows to exit the procedure:
6.
Press and release the ESCAPE key or do not operate for 60 s.