Flyzone HCAA1981 - Manual (Page 8)

❏
2. Open the battery canopy and plug the battery pack
into the plug in the fuselage.
❏
3. Close and latch the canopy.
❏
4. Move the power switch back to the “ON” position.
CAUTION: Stay clear of the propellers once the
battery pack is plugged in and the switch is turned on.
❏
1. Center the trim levers on the front of the transmitter.
❏
2. Place a straightedge across the bottom of the V-tail. It
should be flat all the way across. If it is not, unclip the clevis
from the control horn and use the included wrench to
loosen the nut securing the clevis. Now the clevis can be
rotated in or out. Reattach the clevis to the control horn and
CHECK THE CONTROLS
8