Futaba GY601 User Manual

Page 20

Advertising
background image

20

D

ATA

S

ETTING

AVCS Sense

Initial value : 100%

Adjusts the rudder control characteristic in the AVCS mode. Setting
range is 50 to 150%.

Check the rudder operation feeling and stopping characteristic and
adjust. When the flight mode (page 19) is the 3D mode, this value
becomes the pirouette standard value.

Linkage Limit Setting

Initial value : 100%

Sets the rudder servo travel limit.

Operate the rudder stick and adjust the rudder servo travel limit by
pressing the +/- key so that the servo moves to the maximum linkage
position. Use the same procedure to set both the left and right limits .
When setting, move the servo substantially so that the rudder angle
automatically becomes 200% and limit setting is easy. A or B is
displayed for the right and left directions.

Note: When this screen is displayed, the GY601 does not operate as
a gyro. To check operation, return to the initial screen, etc.

Advertising