Futaba GY601 - Manual (Page 24)

24
D
ATA
S
ETTING
When Using a T9Z Transmitter Programmable Mixing
The Programmable Mixing (PMIX) function lets operator perform a gain
adjustment at each condition. Set the sensitivity at all conditions.
[GY601 Settings]
Select the gyro operation mode at the GY601 Mode screen. (AVC, NOR, or
CMT)
[Transmitter Settings]
Function Control:
Set the CH5 (GYR) switch to “NUL” at the transmitter Function Control
(FNC) setup screen.
ATV function:
Adjust both the RATE A and RATE B rates to 120% at the transmitter ATV
function setup screen.
Programmable Mixing function:
1. Select the “ACTIVE” mode (ACT) at the transmitter Programmable Mixing
setup screen.
2. Set the mixing type to “OFS”.
3.Set the slave channel to “GYR”.
4. Set the sensitivity rate (RATE).
(The following page shows a setting example in the CMT mode.)
[Sensitivity Display]
The gain display indicates the actual gain at the GY601 normal screen
display. The following shows the relationship between transmitter and gyro
setting.
- Relationship between transmitter and gyro setting
Transmitter
settings
GY601mode
settings
Actual gain
NOR
AVC
CMT
-100% - 0% - +100%
Normal mode
AVCS mode
Normal mode AVCS mode
(G2) (G1)
100% - 0% - 100%