42 a - b repeat play – Philips CCZ192AT User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
42 A - B Repeat Play
Follow the steps below to program the TV/VCR to play the mater
ial between two specified points (A and B) on a tape over and
over again.
I
Insert a tape in the TV/VCR.
4
Press the PLAY/A button or the STOP/T button to select
REPEAT PLAY.
VCR SEUJP . ..
ONETIME PLAY [ON]
> REPEAT PLAY
ON.SCREEN MODE
DEFEAT F®:ORDINC [OFF]
SELECT iT CHOOSE ►
TO END PRESS EXIT
/
5
Press the F.FWD/^ button repeatedly so that A-B
appears beside REPEAT PLAY..
VCR SETUP
ONETIME PLAY
> REPEAT PlAY
(A-B)
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
SELECT AV CHOOSE ►
\ TO END PRESS EXrr
y
To cancel A-B Repeat Play, set ONE
TIME PlAY to ON.To set ONETIME
PLAY to ON, follow steps 2-3
above. Then, press the PLAY/A but
ton or the STOP/T button to select
ONETIME PLAY. Press the F.FWOI
button so that ON appears
beside ONE TIME PLAT Then, press
the STATUS/EX/T button.
The end position (6j must be later
on the tape than the start position
(A).