Hookin; up the tv/ycr (confd) 7 – Philips CCZ192AT User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Hookin; Up The TV/YCR (confd) 7
D.
Hooking Up Your
TV/VCR to Another
Video Source
(VCR or Camcorder)
You may need this connection
if you want to copy tapes.
Details are on page 31.
Use an Audio cable to connea the AUDIO
Use a Video cable to connect the VIDEO OUT Jack on the
VCR to the VIDEO Jack on the front of the TV/VCR.
2
Plug in the TV/VCR.
3
Before you turn on the TV/VCR, go to page eight.
• Before connecting an antenna or cable signal to theANTfennoJ Jack, make sure the pin is not bent If the pin is
bent, straighten it fls illustrated, then connea the antenna or cable signal to the ANTfenno) Jack.
• Audio and video cables are not supplied.
Bent pin
Crooked Pin
Straight Pin
Cable Plug