Automatic operation features 45, Automatic playback, Automatic rewind, eject, off – Philips CCZ192AT User Manual
Page 45: Tape eject, Automatic tracking adjustment, Manual tracking
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Automatic Operation Features 45
The following playback features will always operate.
Automatic Playback
When you put a tape in theTVA/CR,the power will come on
automatically. If the tape’s record tab is missing, playback will
begin. If a timer recording is set, the power will not come on auto
matically when you insert a tape with the record tab intact If a
timer recording is set and theTV/VCR power is off, theTV/VCR
will eject the tape if the record tab is missing.
Automatic Rewind, Eject, Off
When a tape is played, fast forwarded, or recorded to its end, the
TV/VCR will rewind the tape, stop, turn itself off, and eject the
tape. If a real-time counter memory is set the TV/VCR will only
rewind the tape to the point at which the counter was set to zero,
then stop. TheTV/VCR will not turn itself off or eject the tape.
Memory Rewind, Power Off
When the POWER button is pressed while the TV/VCR is rewind
ing a tape, REW -+ POWER OFF will appear on-screen. The
TV/VCR will turn itself off when the tape has finished rewinding.
If a real-time counter memory is set, theTV/VCR may only rewind
the tape to the point at which the counter was set to zero,dien
turn itself off.
Tape Eject
A tape can be ejected with theTV/VCR power on or off (but the
TV/VCR must be plugged in). If a timer recording is programmed,
a tape can not be ejected when the power is off. Turn on the
TV/VCR power, then eject the tape. Be sure to insert a tape and
turn off the TV/VCR power for the timer recording.
Automatic Tracking Adjustment
The TV/VCR automatically adjusts the tracking to give you the
best possible picture quality. With some recordings, however, you
may get a better picture using the manual tracking controls (see
below).
Manual Tracking
To adjust the tracking manually, press the CHANNEL ▲/▼ but
tons on the TV/VCR or the TRACKING A/T buttons on die
remote control.
Tracking returns to Automatic Tracking Adjustment when a tape is
inserted or when the STOP/T button is pressed.
Before
Tracking
Adjustment
After
Tracking
Adjustment